S4 Quattro Wagon V8-4.2L (BHF) (2008)
Door Lamp: Service and Repair
Door Panel Lamp
Interior Lamps
CAUTION!
Before beginning repairs on the electrical system:
‹› Obtain the anti-theft radio security code.
‹› Switch the ignition off.
‹› Disconnect the battery Ground (GND) strap.
‹› After reconnecting vehicle battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows
according to Repair Information and/or Owner's Manual.
‹› Steps after reconnecting voltage supply => See: Starting and Charging/Battery/Description and Operation/Battery.
Door Panel Lamp
Removing
-
Remove door trim:
-
Remove bulb - 1 - from socket at door trim.
-
Unplug connector - 2 - from socket.
Installing
Installation is reverse of removal, paying attention to the following:
-
Plug in connector.
-
Insert light bulb for light in door panel into opening and engage.