S4 Quattro Wagon V8-4.2L (BHF) (2008)
Headlamp Alignment Control Module: Service and Repair
Automatic Headlamp Range Control
Headlamp Range Control Module J431 , Removing And Installing
Removing
-
Location: at instrument panel carrier behind glove box
-
Remove glove box.
-
Disconnect electrical connection - arrow -.
-
Remove screws - 1 - and - 2 - and remove module.
Installing
Install in reverse order of removal.
Tightening torque
Component - fastener
Nm
Control module to body - screw
3 Nm