S4 Quattro Wagon V8-4.2L (BHF) (2008)
Drive Belt: Service and Repair
Ribbed Belt
Ribbed Belt
Special tools, testers and auxiliary items required
‹› Torque Wrench (V.A.G 1332)
Removing
-
Bring lock carrier into service position. Refer to => [ Lock Carrier, Moving into Service Position ] See: Engine, Cooling and
Exhaust/Engine/Service and Repair/Removal and Replacement/Lock Carrier, Moving Into Service Position.
‹› Before removing ribbed belt, mark the turning direction on it with chalk or a felt tip pen. A reversed direction of rotation can cause damage to the
belt under operating conditions.
-
Loosen tensioning bolt - arrow - and remove ribbed belt.
Installing
-
Place ribbed belt over belt pulley in the specified sequence.
1. Generator
2. Ribbed belt
3. Idler roller