S4 Quattro Wagon V8-4.2L (BHF) (2008)
-
Remove cover - 1 - on left side of engine compartment.
-
Pinch off coolant hose - 2 - with Hose Clamps Up to 25 mm dia. (3094) and detach at coolant expansion tank.
-
Remove coolant expansion tank bolt - arrow -.
-
Disconnect Engine Coolant Level (ECL) Warning Switch (F66) wiring at bottom of expansion tank and lay aside coolant expansion tank with
coolant hose - 1 - connected.
-
Use suitable plug to seal connection, if necessary.
-
Take connectors - 1 - to - 4 - out of holder on right side of bulkhead.