S4 Quattro Wagon V8-4.2L (BHF) (2008)
-
Remove holder screws for noise insulation - arrows -.
-
Detach universal mount (V.A.G 1359/2) from Engine/Transmission Jack (V.A.G 1383 A) and place wooden block - arrow - on press tool instead.
-
Support rear cross member using Engine/Transmission Jack (V.A.G 1383 A).
-
Remove bolts - 1 - and - 2 -, then bolts - 3 - and - 4 -.
-
Slowly lower rear cross member, using Engine/Transmission Jack (V.A.G 1383 A), until distance between rear cross member and body is equal to
dimension "x".