S4 Quattro Wagon V8-4.2L (BHF) (2008)
-
First remove bolts - 1 - and - 2 -, then bolts - 3 - and - 4 -.
-
Slowly lower rear crossmember using engine/transmission jack (V.A.G 1383 A) until distance between rear crossmember/chassis acquires
dimension - x -.
‹› Dimension - x - = 60 mm.
‹› Transmission must not be lowered further because otherwise driveshaft joint and decoupling element in front exhaust pipe may be damaged.
-
Remove heat shield for left and right drive axles - arrow -.
-
Disconnect connecting rod - 2 - of shift rod.