S4 Quattro Wagon V8-4.2L (BHF) (2008)
-
Remove cover - 1 - in engine compartment (left side).
-
Clamp off coolant hose - 2 - using Hose Clamps Up to 25 mm dia. (3094) and disconnect from coolant expansion tank.
-
Seal connection using a plug that fits.
-
Remove coolant expansion tank - arrow -.
-
Disconnect electrical wire to Engine Coolant Level (ECL) Warning Switch (F66) at bottom on expansion tank and set aside coolant expansion
tank with coolant hose - 1 - connected.
-
Remove electrical harness connectors - 1 to 4 - from bracket at left of bulkhead.