S4 Quattro Wagon V8-4.2L (BHF) (2008)
/Page-1214004.png)
-
Remove heat shield - A - for driveshaft - arrows -.
-
Remove bolts at transmission/driveshaft flange.
-
Push driveshaft together with rear final drive. The constant velocity (CV) joints can move axially.
-
Tie up driveshaft to body.
-
Place lifting surface of Engine/Transmission Jack (V.A.G 1383 A) centrally on housing casing - arrow - and support transmission from below.
CAUTION!
