S4 Quattro Wagon V8-4.2L (BHF) (2008)
Shift Interlock Solenoid: Service and Repair
09L, 6 Speed AWD A/T
Shift lock solenoid N110, removing and installing - 09L, 6 Speed AWD A/T
Removing
-
Remove selector mechanism cover.
-
Disconnect electrical connector at Shift lock solenoid N110.
-
Release retainer and pull out Shift lock solenoid N110 from front - arrows -.
Installing
Installation is performed in reverse sequence. Note the following:
-
Press Shift lock solenoid into guide until it engages. Actuating lever - 2 - for solenoid must engage in locking lever - 1 - on selector mechanism.
-
Install selector mechanism cover.