S4 Quattro Wagon V8-4.2L (BHF) (2008)
/Page-2955002.png)
The locking tongue is engaged in safety belt latch and belt has been pulled out to dimension -L-, display on Vehicle Diagnosis, Testing and
Information System (VAS 5051 A) - yes -.
-
Then pull belt out completely as far as stop. While pulling the belt, the display on the Vehicle Diagnosis, Testing and Information System (VAS
5051 A) must remain on - yes -.
-
Now unroll belt to dimension -L- without releasing the locking tongue. The display on the Vehicle Diagnosis, Testing and Information System
(VAS 5051 A) must remain on - yes -.
-
Release locking tongue and slowly roll belt webbing up, the display must change from - yes - to - no - at a remaining length of 100 mm at the
latest.
The belt is completely extended, display on Vehicle Diagnosis, Testing and Information System (VAS 5051 A) - no -.
Length - L:
‹› Length -L- on the sedan is 250 mm for the left and right belt. The belt diagonal adjuster is at the center.
‹› Length -L- on the Avant is 220 mm for the left and right belt. The belt diagonal adjuster is at the center.
‹› Length -L- on sedan and Avant is 500 mm for center belt.
