S4 Quattro Wagon V8-4.2L (BHF) (2008)
/Page-2504002.png)
-
Remove hex socket head bolt - 6 -.
-
Release trim cover - 1 - on upper steering column trim - 2 - using a small screwdriver - arrows A and B -.
-
-
Separate upper trim - 2 - from lower trim - 3 - and remove upper trim.
-
Remove release lever for steering column adjustment - 7 - and guide out lower trim.
-
Disconnect upper electrical connection at spiral spring.
-
Carefully release clip fasteners - arrows - and remove spiral spring - 1 - from steering column switch module.
‹› Steering column switch module shown removed for illustration purposes.
Installing
Install in reverse order of removal, noting the following:
