S4 Quattro Wagon V8-4.2L (BHF) (2008)
Tie Rod: Service and Repair
Tie Rod
Tie Rod
Special tools, testers and auxiliary items required
‹› Torque Wrench (V.A.G 1332)
‹› Measure vehicle after repair. Refer to => [ Wheel Alignment ] See: Alignment/Service and Repair/Wheel Alignment.
Removing
-
Dismount tire.
-
Remove coil spring. Refer to => [ Coil Spring ] See: Suspension/Suspension Spring ( Coil / Leaf )/Service and Repair.
-
Remove threaded connections - 1 - and - 2 - and remove tie rod.
Installing
‹› Replace bolts and self-locking nuts. Notes in exploded view diagrams. Refer to => [ Subframe ] See: Suspension/Description and Operation/Rear
Suspension/FWD.
-
First tighten threaded connections nuts - 1 - and - 2 - only to 20 Nm.
-
Install coil spring. Refer to => [ Coil Spring ] See: Suspension/Suspension Spring ( Coil / Leaf )/Service and Repair.
-
Tighten threaded connections - 1 - and - 2 -