S4 Quattro Wagon V8-4.2L (BHF) (2008)
/Page-2766002.png)
-
Disengage ABS cable at wheel bearing housing.
-
Remove disc brake.
-
Remove bolts - arrows - and remove the heat shield.
-
Remove combi-bolt - 3 - and bolt - 4 -.
‹› Measure vehicle after repair. Refer to => [ Wheel Alignment ] See: Alignment/Service and Repair/Wheel Alignment.
‹› Do not use a chisel or similar tool between steering arm - 1 - and tie rod ball joint sealing washer - 2 - when removing tie rod, otherwise sealing
washer could be damaged.
