S4 Quattro Wagon V8-4.2L (BHF) (2008)
Shift Interlock Solenoid: Service and Repair
Through VIN 8E_8A 002699
Shift Lock Solenoid
Removing
-
Remove cover for shift mechanism. Refer to => [ Selector Mechanism Cover ] See: Automatic Transmission/Transaxle/Shifter A/T/Service and
Repair/Removal and Replacement/09LA Transmission/Selector Mechanism Cover.
-
Disconnect electrical harness connector on Shift Lock Solenoid (N110).
-
Release logs and remove the shift lock solenoid ( N110) - arrows -.
Installing
Install in reverse order, paying attention to the following:
-
Press shift lock solenoid into guide until it engages; operating lever - 2 - of solenoid must engage in locking lever - 1 - on shift mechanism.
-
Install cover for shift mechanism. Refer to => [ Selector Mechanism Cover ] See: Automatic Transmission/Transaxle/Shifter A/T/Service and
Repair/Removal and Replacement/09LA Transmission/Selector Mechanism Cover.
-
Check shift lock solenoid (N110) function. Refer to => [ Selector Mechanism, Checking ] See: Automatic Transmission/Transaxle/Shifter
A/T/Service and Repair/Procedures/09LA Transmission.