S4 Quattro Wagon V8-4.2L (BHF) (2008)
/Page-1464002.png)
-
Remove heat shield - 1 - for exhaust system below selector mechanism - arrows -.
-
Remove bolts at transmission/driveshaft flange.
-
Push driveshaft - 2 - together toward rear final drive. The constant velocity joints can be moved axially.
-
Tie driveshaft to side, onto heat shield - arrow -.
-
Detach universal mounting bracket V.A.G 1359/2 from engine/transmission jack V.A.G 1383 A.
-
Place telescopic arm of engine/transmission jack V.A.G 1383 A centrally below cast lug on transmission housing - arrow - and support
transmission from below.
-
Remove bolts - 1 - and - 2 - and lower subframe at rear.
-
Remove transmission support (left-side).
