S4 Quattro Wagon V8-4.2L (BHF) (2008)
/Page-1467006.png)
‹› Do not bend selector shaft lever when pressing on, otherwise shift mechanism can no longer be adjusted exactly.
-
Install transmission supports.
-
Install subframe and when doing so following tightening sequence.
-
Secure selector lever cable bracket - arrows -.
-
Adjust selector lever cable. Refer to => [ Selector Lever Cable, Checking and Adjusting ] See: Procedures/09LA Transmission/Selector Lever
Cable, Checking and Adjusting.
-
Tighten driveshaft on the transmission.
-
Install exhaust system tension-free.
