S4 Quattro Wagon V8-4.2L (BHF) (2008)
/Page-1456005.png)
‹› Installation position: The angled end of the securing clasp faces toward the inside of the shift mechanism.
-
Install locking cable. Refer to => [ Locking Cable ] See: Shift Interlock/Shift Interlock Cable/Service and Repair/09LA Transmission.
-
Adjust locking cable. Refer to => [ Locking Cable Adjusting ] See: Shift Interlock/Shift Interlock Cable/Adjustments/09LA Transmission/Locking
Cable Adjusting.
-
Adjust selector lever cable. Refer to => [ Selector Lever Cable, Checking and Adjusting ] See: Shift Linkage/Shift Cable/Service and
Repair/Procedures/09LA Transmission/Selector Lever Cable, Checking and Adjusting.
-
Tighten driveshaft on the transmission.
-
Install exhaust system tension-free.
