S4 Quattro Wagon V8-4.2L (BHF) (2008)
Shifter A/T: Removal and Replacement
Shift Mechanism
Shift Mechanism
Special tools, testers and auxiliary items required
‹› Socket and key (T40031)
Removing
-
Remove selector lever handle. Refer to => [ Selector Lever Handle ] See: Selector Lever Handle.
-
Remove selector mechanism cover - 1 -. Refer to => [ Selector Mechanism Cover ] See: Selector Mechanism Cover.
-
Remove air conditioning operating unit.
-
Remove ashtray in center console.
-
Disconnect electrical harness connector on Shift Lock Solenoid (N110).
-
Raise retaining tab - A - and remove locking lever in direction of - arrow -.
-
Place selector lever in position "D".
-
Loosen rear clamping screw on selector lever cable through the hole in shift mechanism approximately one turn using socket and key (T40031).