S4 Quattro Wagon V8-4.2L (BHF) (2008)
Clutch Slave Cylinder: Service and Repair
Clutch Slave Cylinder on Vehicles With 4.2 Liter V8 Engine (S4), Removing and Installing
Clutch slave cylinder on vehicles with 4.2 Liter V8 engine (S4), removing and installing - 6 Spd. Manual Transmission 0A3 All Wheel Drive
Observe the notes on removing and installing clutch master cylinder and slave cylinder.
Special tools, testers and auxiliary items required
^
Engine/transmission jack VAG 1383 A
Removing
-
Release quick release fasteners - 1 -, unscrew bolts - 2 - and remove noise insulation.
-
Disconnect exhaust system at clamps - arrows -
Note:
^
The flexible pipe connection (de-coupling element) in the front exhaust pipe must not be bent more than 10 degrees - otherwise it can be damaged.