S4 Quattro Wagon V8-4.2L (BHF) (2008)
15 - Triple roller star
^
Chamfer - arrow - faces splines drive axle splines
^
When installing triple roller star on profile shaft, profile shaft splines must be lightly coated with grease used in joint.
16 - Circlip
^
Replace
^
Insert in shaft groove
17 - Multi-point socket head bolt
18 - Triple roller joint housing
Joint protective boots made from rubber are tightened with hose clamp pliers V.A.G 1275.
Tightening clamp on inner joint
Driving outer constant velocity joint down
-
Secure drive axle with protective covers in vise clamp.
-
Remove large clamping sleeve and turn back protective joint boot.
-
Strike a copper or brass drift on CV joint inner race with a hammer