S4 Quattro Wagon V8-4.2L (BHF) (2008)
/Page-1569003.png)
^
Servicing
^
Installing: Drive onto shaft using plastic hammer until compressed circlip seats.
^
Circlip must lie in joint chamfer when guiding in, guide with pliers if necessary.
^
Greasing
^
When installing joint on profile shaft, profile shaft splines must be lightly coated with grease used in joint.
16 - Bolt
^
Always replace if removed
^
Loosen
^
Fastening
^
Torque specification.
