S4 Quattro Wagon V8-4.2L (BHF) (2008)
/Page-1605001.png)
Constant Velocity Joint: Overhaul
Front Drive Axle with 108 mm dia. Inner Constant Velocity Joint
Inner CV joint, servicing
Inner CV joint, removing
-
Drive axle, clamping in vise
Use protective vise covers for this.
-
Drive cover down with copper or brass drift
-
Remove circlip
-
Remove joint grease and mark location of CV joint to drive axle.
-
Clamp drive axle in vise at CV joint, as shown in illustration.
-
A 2nd technician must hold drive axle horizontally so that CV joint is not damaged.
-
Bend edge - arrow - of cap up slightly with small flat chisel.
-
Drive cap down with copper or brass drift
