S4 Quattro Wagon V8-4.2L (BHF) (2008)
3
Sealing ring
4
Groove in triple roller joint
-
Insert axle shaft in vise.
-
Lightly press on cover - 1 - from repair kit so that circlip from the repair kit can be inserted.
-
Insert circlip from repair kit all around below engaging groove.
‹› Make sure circlip engages audibly.
-
Position joint in center position. See "min" - " max" position.
‹› It is necessary to vent CV boot - arrow -, e.g. using a screwdriver, while positioning joint piece in center position.
-
Install clamp - 2 -.