S4 Quattro Wagon V8-4.2L (BHF) (2008)
Pressing off inner constant velocity joint
-
Rebound circlip
-
Drive off protective boot with drift.
Note:
^
Support ball hub with Thrust Plate VW402.
Pressing on inner constant velocity joint
-
Before installing joint or triple roller star, splines - A - must be lightly coated with grease used in joint.
-
Press on joint until stop.
Use support sleeve VW 522
-
Insert circlip.
Note:
^
Position ball hub with chamfer on inner diameter (splines) on drive axle.