S4 Quattro Wagon V8-4.2L (BHF) (2008)
/Page-1588001.png)
Constant Velocity Joint: Removal and Replacement
Peened Triple Roller Joint AAR 2600 i or 3300 i Assembly Overview
Peened Triple Roller Joint AAR 2600 i or 3300 i Assembly Overview
Filling triple roller joint shaft with grease:
Regrease joint when replacing CV boot.
1 - Clamp
‹› Always replace
‹› Different clamps possible depending on model
‹› Can also be installed with Pliers (3340)
2 - CV boot for triple roller joint
‹› Protective joint boot must fit in groove and on joint contour.
