Audi Workshop Service and Repair Manuals

2 - Wheel bearing

‹› Interior diameter in tiered version

‹› Installation position: Larger internal diameter of wheel bearing faces wheel hub

‹› Pressing out => [ Pressing wheel bearing out of wheel bearing

housing ] 

‹› Pressing in => [ Pressing wheel bearing in wheel bearing housing ] 

3 - Cover plate

4 - Wheel hub

‹› Tiered version

‹› Pressing out => [ Wheel hub, removing ] 

‹› Pressing in => [ Pressing wheel hub into wheel bearing ] 

‹› Light construction wheel hub, refer to => [ Light Weight Wheel Hub Characteristics ] See: Steering and Suspension/Suspension/Rear

Knuckle/Description and Operation/Light Weight Wheel Hub Characteristics

5 - Torx bolt

‹› Tightening specification, refer to => Brakes and Traction Control See: Brakes and Traction Control

6 - Rubber bushing

‹› Removing => [ Rubber bushing, removing ] See: Steering and Suspension/Suspension/Rear Knuckle/Description and Operation/Stub Axle

Carrier, FWD, 

‹› Installing => [ Rubber bushing, installing ] See: Steering and Suspension/Suspension/Rear Knuckle/Description and Operation/Stub Axle

Carrier, FWD, 

Wheel hub, removing

‹› Wheel bearing housing must rest on machined bolt hole surface.

Pressing wheel bearing out of wheel bearing housing