S4 Quattro Wagon V8-4.2L (BHF) (2008)
/Page-1560003.png)
-
Drive in new seal to stop, without canting seal.
Installing left oil seal
-
Coat outer edge of gasket with axle oil.
-
Fill area between sealing lip and dust lip halfway with sealing grease G 052 128 A1.
-
Drive in new seal to stop, without canting seal.
Install right and left flange shafts
-
Drive in flange shaft using centering mandrel VW 295.
-
Install rear final drive.
-
Axle oil in rear final drive, checking.
