audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Speed Sensor, Checking|Page 5636 > < Understanding Track Style Wiring Diagrams, Important Stuff !|Page 5633
Page 1
background image

Speedometer Head: Testing and Inspection
Speed Sensor, Checking

Speed sensor (speedometer)

-

Connect VAG 1598/4 adapter harness to 26-point instrument cluster connector (red).

-

Connect adapter harness to VAG 1598A test box.

-

Set digital multimeter (Fluke 83 or equivalent) to AC volt range.

-

Connect multimeter between sockets 8 and 14 of VAG 1598A test box.

-

Place transmission in neutral and apply parking brake.

-

Secure vehicle with wheel chocks to prevent rolling.

-

Raise left front of vehicle at proper lift point until wheel turns freely.

-

Place jack stand under vehicle for safety.

-

Switch ignition ON.

-

Slowly rotate left front wheel by hand.

-

Must be approx. 4.5 volts

If NOT:
-

Check wiring for open circuit according to wiring diagram, repair as necessary, or

-

Replace speed sensor.

Speed Sensor, Checking|Page 5636 > < Understanding Track Style Wiring Diagrams, Important Stuff !|Page 5633