audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Fuel Pressure|Specifications|Page 2594 > < Fuel Pressure|Specifications
Page 1
background image

Fuel Pressure: Testing and Inspection

WARNING!

When working with fuel or parts of the fuel system:

^

DO NOT smoke.

^

DO NOT use heaters or have anything else in the area that could ignite fuel.

^

Protect eyes and skin.

^

Always have a fire extinguisher readily available. Be prepared for residual fuel pressure in the system. When loosening fuel line
connections:

^

Loosen fittings slowly to allow pressure to be relieved.

^

Be prepared to collect fuel that is discharged.

CAUTION!

^

Always clean fuel line connections and surrounding area before loosening fittings.

^

Always replace seals and fuel hose clamps.

Requirements

-

Fuse 17 (in fuse holder) OK

-

Fuel filter OK

-

Battery: minimum 12 volts available

Checking system fuel pressure

-

Remove fuse 17 from fuse holder.

Fuse 17 Terminals 1 & 2 In Fuse Panel

-

Connect remote control VW 1348/3A (using adapter lead VW 1348/3-2 and adapter cables from VW 1594) between:
^

Fuse 17 terminal -2- and

^

Positive (+) remote connection in engine compartment

-

Disconnect vacuum hose from fuel pressure regulator.

Fuel Pressure Gauge Set

-

Connect pressure gauge VW 1318 into fuel supply line as shown, using adapters VW 1318P and VW 1318/15.
^

A = Fuel supply line from tank

^

B = Fuel line to fuel rail

Note:

Fuel Pressure|Specifications|Page 2594 > < Fuel Pressure|Specifications