S4 Sedan L5-2226cc 2.22L DOHC Turbo (AAN) (1992)
11
Lower Spring Seat
-
With stop for coil spring
-
Installation position, refer to Fig. 2
12
Shock Absorber
-
Can be replaced individually
-
Shock absorber shaft. thread size: 10 mm
-
Use proper disposal procedures for removed shock absorbers before scrapping
-
Before replacing, check vehicle identification plate
-
Imprint on vehicle data plate:
-
1BA = Standard version
NOTE: Vehicles with sports suspension are equipped with gas shock absorbers.
-
Checking conventional shock absorbers (removed) as follows:
-
Hold shock absorber upright.
-
Check operation by extending and compressing by hand.
-
Resistance must be even and smooth over entire stroke
-
Shock absorbers that have been stored for a long period of time may need to be pumped several times.
-
Faulty shock absorbers make thumping noises while driving.
-
If shock absorbers are working properly, slight traces of oil on shock absorber do not necessarily mean it must be replaced.
-
Too much oil lost will result in a "flat spot" during extension and compression.
Fig. 1 - Installation Position Of Damping Ring
-
Both tabs of the damping ring (arrows) must contact spring seat.
Fig. 2 - Installation Position Of Lower Spring Seat
-
Coil spring stop must align with shock absorber mounting eye.
DISASSEMBLY