S4 Sedan L5-2226cc 2.22L DOHC Turbo (AAN) (1992)
Clutch Slave Cylinder: Service and Repair
Fig. 4 Installing clutch slave cylinder
The slave cylinder must be installed on the transmission housing in the approximate direction of operation of the pushrod, without any major lateral
deviation.
CAUTION: If the slave cylinder is twisted, there is a risk that the push- rod will not connect with the clutch release lever.
Note:
To aid installation, engage 4th gear before installing the slave cylinder.
Pre-load the slave cylinder just far enough to install the securing bolt Always replace the securing bolt