S4 Sedan L5-2226cc 2.22L DOHC Turbo (AAN) (1992)
Fig. 2 Installing inner CV joint
Press CV joint on to stop.
Install circlip.
CAUTION: Chamfer on inner diameter of ball hub (splines) must point toward collar on axle shaft.
Fig. 4 Ventilating CV joint boot
Attaching the CV joint boot onto the outer body of the joint frequently requires compressing or squeezing the boot. This produces a vacuum in the
joint boot, which may cause a crease to the inside when driving (arrow).
For this reason, after installing the joint boot, vent it briefly by letting some air in at the small diameter end, thus creating a pressure balance and
restoring the correct boot shape.