S5 Quattro Coupe V8-4.2L (CAUA) (2009)
/Page-2051001.png)
Front Bumper Reinforcement: Service and Repair
Impact Absorber
Impact Absorber
Removing
-
Remove front bumper cover.=> [ Front Bumper Cover ]. See: Service and Repair/Front Bumper Cover
-
Disconnect the front parking aid sensor electrical wiring harness - 1 - - arrow - if applicable.
-
Guide the impact absorber - 2 - out of the brackets - A - and remove it.
Installation
Installation is reverse of removal, but note the following:
-
Install the front bumper cover. Refer to => [ Front Bumper Cover ]. See: Service and Repair/Front Bumper Cover
