S5 Quattro Coupe V8-4.2L (CAUA) (2009)
If Valve Seal Removal Tool (3364) cannot be used on some valve stem seals due to restricted clearance, proceed as follows:
-
Drive out the roll pin - arrow - on the puller with a drift and remove the impact puller attachment.
-
Position the lower part of the Puller (3364) on the valve stem seal.
-
Secure the puller with a drift or cotter pin drive - 1 - as shown in the illustration.
-
Position the valve lever on the puller and remove the valve stem seal - arrow -.
CAUTION!