S5 Quattro Coupe V8-4.2L (CAUA) (2009)
Compressor Pulley: Service and Repair
Drive Plate With Roller Bearings
A/C Compressor
Drive Plate with Roller Bearings
-
Remove the drive plate from the compressor shaft. Refer to => [ Drive Plate, from Compressor ]. See: Service and Repair/Drive Plate, From
Compressor
-
Remove the circlip - A -.
-
Remove the drive plate - B -.
‹› Replace circlip - A -.
‹› Clean compressor flange before sliding on drive plate.
‹› When installing circlip - A -, note that it cannot be bent open more than is necessary for installation.
‹› Insert circlip - A - on proper side, the side with beveled insertion edge - C - faces away from compressor (install flat side facing compressor).