Audi Workshop Service and Repair Manuals

Headlamp Alignment Actuator: Service and Repair
Halogen Headlamps, Through 10.2008

Headlamp Beam Adjustment Motor

Removing

-

Remove headlamp housings, refer to => [ Headlamp Housing ].  See: Service and Repair/Halogen Headlamps, through 10.2008/Headlamp
Housing

-

Release the wire clamp - arrow - and remove the low beam/daytime running lamp bulb housing cover - 1 - from the headlamp housing.

-

Turn the headlamp height adjustment screw - 2 - clockwise as far as the stop - arrow A -.

‹› This guides lamp unit in headlamp into "low position". 

-

Insert a screwdriver from behind into the headlamp housing - 1 - and press the headlamp height adjusting screw up out of the housing - arrow B -.