S5 Quattro Coupe V8-4.2L (CAUA) (2009)
Tail Lamp: Service and Repair
Outer Tail Lamp
Outer Tail Lamp
Removing
-
Switch off ignition and remove ignition key.
-
Turn light switch into "0" position.
-
Open the luggage compartment side trim cover.
-
Remove the threaded pins - 2 -.
-
Pivot the tail lamp - 1 - outward - arrow - and disengage retaining pins from the body.
-
Disconnect the electrical connector.
Installing
‹› Tightening specification, refer to => [ Fastener Tightening Specifications ] See: Specifications.
Install in reverse order of removal, observing the following:
‹› The self-adhesive seal on the tail lamp housing must seal correctly.
-
Position the tail lamp on the body and press the retaining pins into the holes.
-
Tighten the threaded pins.