S5 Quattro Coupe V8-4.2L (CAUA) (2009)
Tire Pressure Module: Service and Repair
Directional Stabilization Assistance Control Module and Lens Screen
Directional Stabilization Assistance Control Module and Lens Screen
Removing
-
Remove cover trim - 1 - down from bracket in direction of - arrow -.
-
Press retaining clamp - 1 - in direction of - arrow - and remove directional stabilization assistance control module (J759) sideways and down from
bracket.
-
Disconnect electrical connector and remove directional stabilization assistance control module (J759).
-
Press clamps - arrows -, pull lens screen out of bracket and remove it toward rear.