S5 Quattro Coupe V8-4.2L (CAUA) (2009)
/Page-809001.png)
Information Bus: Service and Repair
Interior CAN Cut-Off Connector Mount
Interior CAN Cut-Off Connector Mount
Removing
-
Disengage the left A-pillar connector station. Refer to => [ Driver Side A-Pillar 6-Pin Connector Station ] See: Maintenance/Fuses and Circuit
Breakers/Fuse Block/Service and Repair/Driver Side A-Pillar 6-Pin Connector Station.
-
Remove the Interior Can Cut-Off Connector (T46i), refer to => [ Interior CAN Cut-Off Connector ] See: Interior CAN Cut-Off Connector.
-
Slide the locking lever - 2 - into the "open " position - arrow -.
-
Press the release - 1 - and press the mount - 3 - for the Interior Can Cut-Off Connector (T46i) back.
Installing
Install in reverse order of removal, observing the following:
-
Slide the locking lever - 1 - on the mount into the " closed" position.
‹› Both markings - arrows - must align.
-
Install the Interior Can Cut-Off Connector (T46i)=> [ Interior CAN Cut-Off Connector ] See: Interior CAN Cut-Off Connector.
-
Install the left A-pillar connector station, refer to => [ Driver Side A-Pillar 6-Pin Connector Station ] See: Maintenance/Fuses and Circuit
