audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Compression Check|Specifications|Page 2794 > < Compression Check|Specifications
Page 1
background image

Compression Check: Testing and Inspection

Compression, Checking

Special tools, testers and auxiliary items required

‹› Spark Plug Removal Tool (3122 B)

‹› Compression Tester (V.A.G 1763)

‹› Ignition Coil Puller (T40039)

Procedure

‹› Engine oil temperature at least 30 °C.

‹› Battery voltage at least 12.5 V.

-

Remove rear noise insulation by loosing the retainers - 2 - and - 3 -.

-

Disconnect electrical connector - 2 - on the Engine Speed (RPM) Sensor (G28).

Compression Check|Specifications|Page 2794 > < Compression Check|Specifications