S5 Quattro Coupe V8-4.2L (CAUA) (2009)
/Page-76001.png)
Control Module: Locations
Mechatronic unit, Transmission Control Module (TCM) (J217), Multi-Function Transmission Range (TR) Switch (F125), Transmission
Input Speed (RPM) Sensor (G182) and Transmission Output Speed (RPM) Sensor (G195)
‹› Location: The mechatronic unit is bolted to the underside of the transmission housing and is covered by the transmission oil pan.
The mechatronic unit incorporates the hydraulic control, the Transmission Control Module (TCM), the Multi-Function Transmission Range (TR)
Switch and the sensors and actuators as a complete synchronized unit. Included are:
‹› Transmission control module (J217)
‹› Multi-Function Transmission Range Switch (F125)
‹› Transmission Input Speed (RPM) Sensor (G182)
‹› Transmission Output Speed (RPM) Sensor (G195)
The "mechatronic" unit can only be replaced as a complete unit.
‹› All components mentioned are tested by On Board Diagnostics (OBD).
Refer to => [ Mechatronic ] See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Valve Body/Service and Repair.
Wiring harness in transmission
‹› Location: The wiring harness - A - with connector - C - is attached to the mechatronic unit - B -.
