S5 Quattro Coupe V8-4.2L (CAUA) (2009)
‹› Removing and Installing, refer to => [ Seat Occupied Sensor ] See: Seat Occupied Sensor
‹› Do not disconnect the electrical connector
2
Seat Pan
3
Retaining Clip
4
Upholstery
‹› For seat pan
‹› Do not separate from the seat occupied recognition mat - 6 -
5
Retaining Clip
‹› Do not release
6
Mat
‹› For seat occupied recognition
‹› Is a component with the seat occupied recognition pressure sensor (G452)
‹› Do not separate from the seat pan upholstery - 4 -
‹› Removing and Installing, refer to => [ Seat Occupied Sensor ] See: Seat Occupied Sensor
7
Mount
‹› For Seat Occupied Recognition Control Module (J706)
8
Spreader Pin
‹› For securing the mount to the seat pan
9
Electrical Wiring Harness
‹› Do not separate from the seat occupied recognition pressure sensor (G452) and seat occupied recognition control module (J706)
10
Passenger Seat Position Sensor (G554)
‹› Is a component of the electrical wiring harness - 9 -
‹› Removing and Installing, refer to => [ Seat Position Sensor, with Seat Occupied Sensor for Passenger Airbag Deactivation ] See: Seat Position
Sensor/Service and Repair/Seat Position Sensor
11
Seat Occupied Recognition Control Module (J706)
‹› Removing and Installing, refer to => [ Seat Occupied Sensor ] See: Seat Occupied Sensor
‹› Do not disconnect the electrical connector