S5 Quattro Coupe V8-4.2L (CAUA) (2009)
/Page-1886006.png)
-
Position the circuit board - 3 - for the seat occupied sensor - 4 - in the opening - 2 - in the seat cushion - 1 -.
CAUTION!
The new seat occupied sensor should be installed in the same location on the seat upholstery as the old seat occupied sensor.
-
Align the seat occupied sensor on the seat upholstery according to the markings - a -.
‹› Dimension - a - = 20 mm.
-
Remove the protective film and bond the seat occupied sensor firmly to the upholstery.
Super sport seat:
