S5 Quattro Coupe V8-4.2L (CAUA) (2009)
CAUTION!
Do not disconnect the electrical connectors on the seat occupied recognition pressure sensor (G452) and the seat occupied recognition
control module (J706).
-
Using a narrow screwdriver, carefully press the seat occupied recognition pressure sensor (G452) - item 3 - off the bracket - arrow -.
-
Open the seat occupied recognition pressure hose guide - 1 - and free up the pressure hose - 2 -.
-
Release the retaining spring - 1 - and tilt the seat occupied recognition control module (J706) - item 2 - out of the mount.
-
Remove the electrical connector - 4 - from the bracket by pressing the release and removing the electrical connector.
-
Open the retaining tab on the electrical wiring harness guide - 5 - - arrow - and free up the wiring harness - 3 -.
-
Remove the bolt - 3 -.