S5 Quattro Coupe V8-4.2L (CAUA) (2009)
Seat Position Sensor: Service and Repair
Seat Position Sensor
Seat Position Sensor
=> [ Seat Position Sensor, with Seat Occupied Sensor for Belt Fastening Detection ]
=> [ Seat Position Sensor, with Seat Occupied Sensor for Passenger Airbag Deactivation ]
Seat Position Sensor, with Seat Occupied Sensor for Belt Fastening Detection
The seat position sensor is provided as a replacement part with the wiring harness and the black 10-pin connector. The following wires with
connectors are contained in the wiring harness.
‹› Wire with seat belt latch coupling connector (driver seat)
‹› Wire with seat belt latch coupling connector (passenger seat)
‹› Wire with front passenger seat occupied sensor (G128) coupling connector.
Removing
CAUTION!
‹› Follow the safety precautions for pyrotechnic components.
‹› Before handling pyrotechnic components (e.g. disconnecting the electrical connector), the person handling it must "discharge static
electricity ". This can be done by touching door striker, for example.
-
Switch the ignition on.
-
Disconnect the battery ground cable with the ignition switched on.
-
Remove front seat:
‹› Standard seat and sport seat (manual), refer to => [ Manual Standard Front Seats ] See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Manual Standard Front Seats.
‹› Standard seat, sport seat (power) and comfort seat, refer to => [ Power Standard Front Seats ] See: Body and Frame/Seats/Service and
Repair/Removal and Replacement/Power Standard Front Seat with or without Memory Function.
‹› Super sport seat, refer to => [ Super Sport Front Seats ] See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Power Super
Sport Front Seat with or without Memory Function.
-
Attach front seat to Fixture For Seat Repair (VAS 6136), refer to => [ Front Seat, Installing on VAS 6136 ] See: Body and Frame/Seats/Service
and Repair/Removal and Replacement/Seat Versions Overview.
-
Remove the bolt - 3 -.