S5 Quattro Coupe V8-4.2L (CAUA) (2009)
/Page-263001.png)
Suspension Control Pressure Sensor/Switch: Service and Repair
Track Control Arm, Ball Joint, Guide Link and Level Control System Sensor Assembly Overview
Track Control Arm, Ball Joint, Guide Link and Level Control System Sensor Assembly Overview
1
Bolt
‹› Always replace after removal
2
Guide link
‹› Removing and installing => [ Guide Link ] See: Steering and Suspension/Suspension/Radius Arm/Service and Repair/Guide Link.
‹› Replace guide control arm bearings => [ Guide Link Bearing ] See: Steering and Suspension/Suspension/Radius Arm/Service and
Repair/Guide Link Bearing.
3
Nut
‹› 70 Nm + an additional 180°
‹› Always replace after removal
‹› Must be tightened in curb weight position => [ Lifting to Curb Weight Position ] See: Maintenance/Wheels and Tires/Wheel Bearing/Service
and Repair/Procedures.
4
Wheel bearing housing
5
Bolt
