S5 Quattro Coupe V8-4.2L (CAUA) (2009)
‹› Only remove and install or replace completely => [ Level Control System Sensor ] See: Level Control System Sensor.
‹› The sensor lever must point toward the back
‹› After loosening, check basic setting of headlamp adjustment.
‹› If the vehicle level sensor was removed and installed on a vehicle with electronic damper regulation or if the linkage was loosened, the control
position must be reprogrammed => [ Control Position, Programing with VAS 5051B ] See: Steering and Suspension/Suspension/Suspension
Control ( Automatic - Electronic )/Testing and Inspection.
‹› If the control position was reprogrammed on vehicles with lane assist, the directional stabilization assistance control module (J759) must be
re-calibrated => [ Lane Assist Calibration Procedure ] See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist
Systems/Testing and Inspection/Lane Assist Calibration Procedure.
16
Bolt
‹› 20 Nm
17
Shock absorber fork