S5 Quattro Coupe V8-4.2L (CAUA) (2009)
Ignition Lock: Customer Interest
Starting System - Ignition Lock Cover Won't Close
28 Ignition lock cover doesn't close
28 10 11
2019402/2
September 10, 2010
Supersedes Technical Service Bulletin Group 28 number 08-18 dated December 2, 2008 for reasons listed below.
AFFECTED VEHICLES
CONDITION
The hinged covers of the ignition lock switch stick in the open position after the key is removed.
TECHNICAL BACKGROUND
Ignition lock panel may have been distorted when installed.
PRODUCTION SOLUTION
Revised installation procedure.
SERVICE
1. Refer to the instructions in ELSA for Removal and Installation of the Access/Start Authorization Switch Trim. This switch is also known as the
ignition switch.
2. Remove the gap cover for the instrument cluster from the instrument panel.
3. Remove the cover for the MMI screen.