S5 Quattro Coupe V8-4.2L (CAUA) (2009)
CAUTION!
‹› Insert return line completely when installing.
8
Bolt
‹› 80 Nm plus an additional 180° turn
‹› Always replace after removal
9
Power steering gear with tie rods
‹› Removing and installing => [ Power Steering Gear ] See: Power Steering Gear.
‹› Servicing => [ Power Steering Gear ] See: Power Steering Gear.
‹› Adjusting => [ Power Steering Gear, Adjusting ] See: Adjustments.
10
Tie rod
‹› Removing and installing => [ Tie Rods ] See: Tie Rod/Service and Repair/Tie Rods.
11
Tie rod end
‹› Removing and installing => [ Tie Rod Ball Joint ] See: Tie Rod/Service and Repair/Tie Rod Ball Joint.
12
Bolt
‹› 20 Nm
13
Pressurized line
CAUTION!
‹› Insert the pressure line completely when installing.
14
Rubber bushing
‹› 6 Nm
15
Union nut
‹› 40 Nm
16
Nut
‹› 6 Nm
17
Nut
‹› 20 Nm + an additional 90° turn
‹› Always replace after removal
18
Wheel bearing housing