S5 Quattro Coupe V8-4.2L (CAUA) (2009)
‹› Ensure both puller lever arms are parallel to each other when using greatest force, adjust if necessary.
-
Mark position of nut - 2 - on tie rod - 1 - for installation later.
-
Loosen nut - 2 -, counter hold on tie rod end - 3 - while doing this.
-
Open and remove spring clip - 3 - using spring type clip pliers (V.A.G 1921).
-
Remove clamping sleeve - 1 - and remove boot - 3 - outward from power steering gear.